RP00441/1 MOQ: 1

Crimping Tool MK3/RS8 For Standard Q Type Relay Crimps Red/Blue Handle

P.O.A
€ 0

Description keyboard_arrow_down

‘Q’ STYLE RELAY TOOLS The MK3-RS8 crimp tool is a hand operated portable tool used to crimp removable connectors RP00043/5 (style QC) onto various wire sizes, for termination at a ‘Q’ relay plugboard. The tool comprises a fixed jaw and a sliding jaw which is operated by squeezing the two handles together. Weight 0.79KG CRIMP PROCEDURE 1. Strip a 5mm length of insulation from the end of the wire to be terminated, ensuring that insulation is stripped without damage to the conductor strands. 2. Slightly twist the stripped conductor strands so that no ‘whiskers’ are formed. 3. Position the connector in the crimping tool jaws so that the raised flange butts against the tool locator bar. 4. Squeeze the tool handles together until the connector is just held in position by the ratchet action. 5. Insert the wire (or wires if two are to be crimped simultaneously) into the connector barrel, then complete the crimp by closing the two handles together. 6. On completion, the handles of the crimp tool will spring apart to open the jaws and release the formed joint. 7. Routine checks should be made to ensure the tool is crimping correctly. 8. To test, first strip a length of either size cable such that the crimp will only grip the conductor. Then check that the crimp will withstand the pull-off forces detailed in the table below.

Datasheets keyboard_arrow_down

Q Style Crimp Tool

Stock Information keyboard_arrow_down

http://schema.org/OutOfStock http://schema.org/NewCondition