AR61 FULL KIT
113LB RAIL 20MM WEB
AR65-1 INSERT
AR61-1 INSERT
AR65 FULL KIT
AR69DE UIC54 RAIL 16MM WEB
AR66LDA
AR261-NR
AR69
Running rail with check rail in situ
HTEPE.DET type hydraulic tooL
TEMPORAIL. 35 mm2 Copper TEMPORAIL lead 1.4 m between centres with RTC1AL10-V contact clamp at either end
HYDRAULIC TOOL FOR INSTALLATION OF TEMPORARY ELECTRICAL RAIL CONNECTION SYSTEM
CCS cable lugs for various types of copper and copper-steel conductors. 16 mm2 Cu flexible
Neutral grease suitable for the protection of contact surfaces.
Protective spray of the external surface of the aluminum cable lug.
Containing Ring
CCC series terminals 35 mm2
Hydraulic portable battery tool with the head
MALE/FEMALE ½” DRIVE EXTENSION 250 MM LONG
Socket's adapters, Lenght 26.5
Reversible ratchet wrench
DRIVE T BAR WITH SLIDING HANDLE
CSF1 Cable Protector
The SFK support is the ideal choice to securely and durably attach the cable to the rail sole. This support system is designed to be applied without tools.
Torque wrenches with adjustable torque, for the correct tightening of the screws in the contacts on the rail. Adjustment range Nm 20-100
Torque wrenches with adjustable torque, for the correct tightening of the screws in the contacts on the rail. Adjustment range Nm 40-200
EXTENDED 1/2 SOCKETS WITH 6 POINTS
EXTENDED 1/2 SOCKETS WITH 6 POINTS. for AR connections (AR60D, AR60A-29, AR260D)
Socket's adapters, Lenght 26.3
Socket's adapters, Lenght 36.1
Socket's adapters, Lenght 35.99
CCS cable lugs for various types of copper and copper-steel conductors. 25 mm2 Cu flexible/steel
Temporail. 240 mm² Aluminium TEMPORAIL lead 1.4 m between centres with RTC1AL10-V contact clamp at either end
CCC series terminals 95 mm2
CCC series terminals 150 mm2
CSF2 Cable Protector
ECR 19
ECR22
ECR 9.5
Go-No-Go Gauge
OG16.2T Plunger
Hand Setting Tool For Installation Of Ar69e & Ar69de
Inst. Kit
RAIL ELECTRICAL CONTACT, SINGLE, TYPE 60E1 (UIC60), 19MM DIAMETER HOLE
RAIL CONTACT, SINGLE, 22 MM DIAMETER HOLE
Hydraulic head for the extrusion of RHTEPE AR contacts to be applied to hydraulic pumps developing a nominal pressure of 700 bar
Torque wrenches with adjustable torque, for the correct tightening of the screws in the contacts on the rail. Adjustment range Nm 10-50
